The Delfin S3 safety shoe is designed to protect your safety. Designed to offer maximum protection and comfort in industrial, construction, welding, cleaning or outdoor work environments.
It has impact resistance of 200 joules, antistatic properties and energy absorption capacity in the heel, guaranteeing safety in every step. Its ergonomic design, its adjustment adapted to the morphology of the worker and its high-quality waterproof and breathable materials, provide a comfortable and moisture-free experience.
With a non-slip nitrile rubber sole, non-metallic toe cap and anti-perforation textile insole, the Delfin S3 shoe is the perfect choice for workers in demanding environments.
Characteristics of the Delfin S3 safety shoe
- Ergonomics and adjustment to the user's morphology.
- Impact resistance (200 joules).
- Antistatic Footwear.
- Energy absorption in the heel.
- Resistance to puncture, hydrocarbons, slipping, and water absorption and penetration.
- Cold insulation.
- Heat insulation.
- Resistance to contact heat.
- Resistance to non-extreme environmental factors, under foreseeable conditions of use.
- Manufacturing system by direct injection to the cut.
- Designed to adapt to the natural perspiration of the foot and its absorption.
- Liners are designed to absorb sweat and perspiration.
- The model meets the specific requirements to offer adequate protection against anticipated risks and resist environmental factors under foreseeable conditions of use.
- Complies with EN ISO 20345:2011.
- Directive 89/686/CE.
- EU Regulation 2016/425.
Description of components
- Black split nubuck bovine leather with a thickness of 2.0 – 2.2mm.
- Tear resistance: > 200 N.
- Tensile strength: > 20 N/mm2.
- Water vapor permeability: > 0.8mg/cm2h.
- Cr VI content: < 3ppm.
- pH: > 3.2.
- Water absorption: < 20% after 60 min.
- Pitch and penetration: > 240 minutes
- Upper, back and tongue: High tenacity textile mesh in black.
- Tear resistance: > 30 N.
- Abrasion resistance: > 56,200 dry and 25,600 wet cycles.
- Weight:> 200 gr/m2.
Lining: Waterproof and breathable GORE-TEX® membrane, bicomponent based on PTFE+PU.
- Weight: 215 gr/m2 ± 15 gr/m2.
- Thickness: 0.7 mm ± 0.20mm.
- Thermal insulation: < 8*10-3 m2K/w.
- Resistance to water vapor: < 8 m2Pa/W.
- Abrasion resistance: > 200,000 dry and 50,000 wet cycles.
- Resistance to the passage of water: > 1 bar.
- Resistance to water penetration at seam crossing: > 1 minute at 1 bar.
Padded neck with interior foam. Buttress non-woven fabric impregnated with resins.
Antibacterial insole designed entirely by our Biomechanics Laboratory, ergonomic design according to the distribution of plantar pressures, arch support, retro capital support and confinement of the soft tissues of the heel, providing comfort, rest and absence of humidity inside the shoe. Antibacterial, antistatic and breathable treatment.
Low-density Antistatic Foamed Polyurethane Midsole with great cushioning capacity. Provides thermal insulation.
Antistatic Nitrile Rubber sole, biomechanical and non-slip design, with anti-roll pads (anti-torsion system). Improves dynamic adaptation by at least 15% compared to previous footwear (midfoot torsion and goal torsion). Provides greater absorption of forces in the impact phase and stability of the footprint, uniformity of footprint and pronation control while walking.
- Tear resistance: > 12 N/mm.
- Abrasion resistance: < 120 mm3.
- Resistance to hydrocarbons: < 10%.
- Heel energy absorption: > 25 J
Non-metallic toecap, with 200 J impact resistance; according to EN ISO 20345:2011& EN ISO 12568:2010, extra last – wide.
Anti-perforation textile insole with resistance to perforation > 1,100 N.
Closing system using laces.
Risks to protect
- Falling objects or crushing the ball of the foot.
- Falls and impact on the heel of the foot.
- Slip falls.
- Gliding on wet or oily surfaces.
- Walking on pointed or sharp objects.
- Injuries to the fingers or deformities in the feet.
- Muscular fatigue caused by walking or standing.
- Works that cause vibrations.
- Possible ankle sprains or strains.
- Accumulation of electrostatic charges generated by the movement or leaks of low voltage machinery.
- Heat from contact with hot surfaces.
- Very extreme heat conditions with a high need for perspiration.
- Protection against dust or dirt.
- Water penetration through the instep due to sporadic or permanent exposure to moisture.
APPLICATIONS OF THE DELFIN S3 SHOE
- Industry and construction.
- Maintenance and welding.
- Outside and inside work.
- Warehouses.
- Transportation.
- Cleaning.
- Humid and hot environments.
- Size 35
- Size 36
- Size 37
- Size 38
- Size 39
- SIZE 40
- Size 41
- Size 42
- Size 43
- Size 44
- Size 45
- Size 46
- Size 47
- Size 48